DashFlash

    This Item is being replaced with the Ultimate DashPac!

     DashFlash is just that a Dash Reflash we included all existing functions of the Dash and added these fun new features;

1. Display actual accurate GPS speed on the LCD and analog needle.
   
2. Add a decimal to the Speed and Top Speed functions. (If your Dash LCD has a decimal display)
3. In the display Menu lineup, we added;
   1. AFR (See Note 3)
   2. BOOST
   3. ESTIMATED HORSEPOWER
   4. INTAKE AIR TEMPERATURE
   5. VOLTAGE (See Note 4)
   6. THROTTLE
4. On the LCD lower left next to the hour meter (Lake Temperature spot for some skis) we added these user selectable options to display in that box;
   1. LAKE TEMPERATURE (See Note 1)
   2. INTAKE AIR TEMPERATURE
   3. DEPTH (See Note 1)
5. On the LCD compass area, we added user select-able options to display in that box; (See Note 1)
   1. Blank/Nothing
   2. Compass
   3. Depth (See Note 1)
   4. RPM
   5. SPEED
   6. AFR (See Note 3)
   7. BOOST
   8. IAT
   9. VOLTAGE (See Note 4)
   10. THROTTLE
   11. ENGINE TEMPERATURE
   12. ESTIMATED HORSEPOWER
   13. TOP SPEED
6. USER SELECT-ABLE SPEED OVERRIDE (BYPASS GPS SPEED LIMITER)
7. WE ADDED USER SELECT-ABLE UNITS CHANGE; (See Note 2)
   1. METRIC
   2. IMPERIAL

 
 
Note 1; This only works if your ski currently has this option otherwise it will be blank or read zeros.
Note 2; This option was only added to 2015 and older. The 2016 and up already have this option.
Note 3; Requires new version of DashPac DashFlash Module to see this option in the Dash.
Note 4; Voltage Reading only work with Bosch ECU and Only reads while the ski is running and for approximately 20 seconds after   the engine is turned off. When its not reading correct voltage the display voltage is zero to let you know its not currently reading voltage. Depending on other aftermarket devices on the can bus voltage may turn off so as not to interfere with other devices.
 



Here is how it works!
You remove your gauge cluster print and fill out our Questionnaire sheet (LINK)
Pack the dash and sheet carefully and ship it to the address on the sheet. We Reflash the dash and ship it back to you.
 
Now unfortunately if you have the original DashPac module it is not completely transferable to this new product. However, it can still be used. Allow me to explain. The DashPac module will still work as it currently dose, under the Depth display. The new AFR display will read zero, but the depth channel will read your AFR and Boost like before. If, however you want the AFR to display under AFR and Voltage to display you will have to purchase the new DashFlash module.
 
If your going to use the new DashFlash Module the DashPac Depth module is NOT required with this product for your depth sensor.
 
Currently We only support the 2012 to 2018 X-package style Dash with the following part numbers;

1. 278002763        2010-11          X-Type,   No Decimal
2. 278002716        2012                 X-Type
3. 278002961        2012/2013     X-Type,   Superseded
4. 278003183*       2014-2015      X-Type   *This Part# Dash has multiple Software versions, we have most versions available.
5. 278003220        2014-2015      X-Type
6. 278003346        2016                 X-Type
7. 278003531         2017                 X-Type
8. 278003527         2017 GTR                         No Decimal
9. 278003651         2018                 X-Type
10. 278003649        2018 GTX        X-Type,   No Decimal

 
If you have another version of X-Style Dash other than listed please contact us for possible development.

DASHFLASH INSTRUCTIONS (.pdf)

AFR top, BOOST middle, and DEPTH lower left

AFR Up top, RPM in the middle, and Depth lower left.

AFR up Top, Speed middle, and Depth lower left

THROTTLE top, COMPASS middle, DEPTH lower left.
Speed Override Turned OFF.
Watch the Speed limiter pull throttle away! (Stock ECU Flash)

Setup