Please take the time to fully read the entire installation instructions before installing DashPac.
Install M1.0 or M2.0
Find your LTC 4 pin DTM connector, unplug it. Plug DashPac in between these 2 connectors. Mount DashPac. Done. Follow above instructions for using DashPac with the exception that MoTeC DashPac will not display 88.8 When you power it up and find Depth mode it will read 0.0 in both modes. Once you start the ski and the sensor warms up it will begin reading AFR.
Use extreme caution! Installing DashPac in any other location then the LTC connection can result in Damage to DashPac , your Ski, yourself, anyone around, and/or property.
Plugging DashPac into the IGN4 connector will cause DashPac to not work and also Disables IBR. and will cause other Problems. Don't Plug into the IGN4 Connection. Only the LTC connector!